Command Start CS-580i FM Instalační příručka Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 22
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
Installation Guide P. 11
Once you access a particular programming Mode, you will automatically start at Function 1.
Once you select one of the Options of Function 1, you will automatically be taken to the next
Function.
To select one of the four Options of any given Function, press the corresponding button
on the Transmitter:
LOCK button .........................to access Option 1
UNLOCK button .....................to access Option 2
TRUNK button .......................to access Option 3
START/STOP button ...............to access Option 4
Table 4: Accessing options
In each Function, once an Option has been selected the Parking Lights will flash 1, 2, 3 or 4
times (depending on the selected Option).
Please note that the different Functions within any particular Mode can only be accessed
sequentially: the Programming Centre will move from Function 1 to Function 2, then to
Function 3, and so on. Therefore, whenever you access a particular Mode, be prepared to
re-configure all the Functions of that Mode in ascending order.
Programming Options
MODE 1 * INDICATES DEFAULT SETTING
FUNCTION 1 – Ignition-controlled Door Locks
OPTION 1* Ignition Lock DISABLED
OPTION 2 Ignition Lock ENABLED
OPTION 3 Ignition UNLOCK ONLY
OPTION 4 Ignition LOCK ONLY
FUNCTION 2 – Secure Lock
OPTION 1* Secure Lock DISABLED (1-sec. Disarm pulse)
OPTION 2 Secure Lock ENABLED in Smart Mode
OPTION 3 Secure Lock DISABLED (1/2-sec. Disarm pulse)
OPTION 4 Secure Lock ENABLED in Standard Mode
FUNCTION 3 – Door lock pulse timing
OPTION 1* 7/10-sec. Lock/Unlock pulses
OPTION 2 4-sec. Lock/Unlock pulses
OPTION 3 7/10-sec. Lock pulse and two 1/4-sec. Unlock pulses
OPTION 4 1/10-sec. Lock/Unlock pulses
FUNCTION 4 – AUX 3 Programming
OPTION 1* Constant output while the TRUNK button is pressed
OPTION 2 1-sec. output when TRUNK button is pressed for 3 sec. with Ignition OFF
or under remote run
OPTION 3 Output with Disarm and Rearm pulses (the Alarm is disarmed while the
Trunk is open; the Alarm rearms automatically afterward)
OPTION 4 1-sec. output when TRUNK button is pressed for 3 sec. with Ignition OFF
or under remote run
FUNCTION 5 – AUX 2 Programming
OPTION 1* Priority Door Access on 1
st
UNLOCK
with unlocking of all doors on each subsequent UNLOCK; with CAR FINDER
OPTION 2 Toggle ON/OFF (with 30-second timeout)
OPTION 3 Constant output while the LOCK and UNLOCK buttons are pressed
OPTION 4 Priority Door Access on 1
st
UNLOCK and on each subsequent odd UNLOCK with
unlocking of all doors on each subsequent even UNLOCK; with CAR FINDER
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Komentáře k této Příručce

Žádné komentáře